Picnic Table (Metal Base) 145(L) x 162.5(W) x 75(H) · SS-012747
Price on request
SKU: SS-012747
Picnic table with wooden top and metal base. Seating area: 145 × 162.5 cm (57.1 x 64 in). Height: 78 cm (30.7 in). **Metal Features:** All metal components are painted with a polyester‑based powder coating in a furnace. Pipe profiles are fabricated with a tolerance of ±20 mm (0.8 in). Prior to painting, surfaces are cleaned of oil, grime, and rust, then phosphated to promote adhesion. After painting with an electrostatic polyester coating, the parts are cured in a 200–220 °C oven for 20 minutes. **Wood Features:** The wood is first‑class yellow pine (Pinus sylvestris) lumber. Sections are cut with a tolerance of ±2 mm (0.1 in) and dimensions with a tolerance of ±20 mm (0.8 in). Knots are limited to four per meter, never exceeding one‑quarter of the piece width. No rot, defective, partially split, or fallen knots are allowed. Ring cracks are prohibited; hairline cracks (1–2 mm (0-0.1 in)) may be present within tolerance. Pressure‑treated specifications may allow small head and length cracks within limits. Resin pockets may not exceed 10 cm (3.9 in) in length and only one per meter; no leaking or exuding resin is permitted. No inner bark, rot cavities, insect holes, or manufacturing defects are permitted beyond the stated tolerances. Deflection is limited to 1/50 of the member length; impact to 1/100 of the width; twist to 2 mm (0.1 in) per meter; sag to between 1/50 and 1/100 of the length. All visible surfaces are sanded smooth. **Metal Supports:** Support legs are made from minimum 40 × 60 mm (1.6 x 2.4 in) electrostatically powder‑coated metal profiles. **Seating Unit:** Two opposite seating units, each 40 cm (15.7 in) wide, 145 cm (57.1 in) long, and 41 cm (16.1 in) high. The seating frame uses 40 × 60 mm (1.6 x 2.4 in) powder‑coated metal profiles, mounted with six galvanized screws into 40 × 90 mm (1.6 x 3.5 in) wooden laths. **Table:** The tabletop measures 74 × 145 cm (29.1 x 57.1 in), crafted from minimum 40 × 90 mm (1.6 x 3.5 in) wooden laths with impregnated, diamond‑shaped, specially milled grooves. Table legs are 70 cm (27.6 in) high, made from 40 × 60 mm (1.6 x 2.4 in) powder‑coated metal profiles. **Impregnation:** All wood components are pressure‑treated for durability and weather resistance.