Classic Series Children's Playground
Price on request
SKU: PS-0050302
Product Technical Specifications Seating Area: 520 x 630 cm (205 x 248 in) Safety Area: 930 x 820 cm (366 x 323 in) Slide Connection Height: 150 cm (59.1 in) Age Group: 3+ Years Spare Parts • Polyethylene Roof – 1 pcs • H:150cm (59.1 in) Polyethylene Straight Slide – 1 pcs • H:150cm (59.1 in) Spiral Slide – 1 pcs • 116×116 Composite Platform – 1 pcs • 60×90 Composite Spiral Extension Platform – 1 pcs • Polyethylene Slide Barrier – 1 pcs • Polyethylene Platform Barrier – 1 pcs • Composite Stair – 1 pcs • H:150cm (59.1 in) Stair and Guardrail – 1 pcs • Spiral Extension Platform Metal Guardrail – 1 pcs • Swing A Pipe – 2 pcs • Swing Carrier Pipe – 1 pcs • H:150cm (59.1 in) Tower Pipe – 4 pcs • Rubber‑Coated Swing Seat – 1 pcs • Polyethylene Guarded Swing Seat – 1 pcs Polyethylene Products Low‑density linear polyethylene (LLDPE – Linear Low‑Density Polyethylene) is a thermoplastic used in various products. It is a semi‑permeable, flexible, and highly durable polymer that offers low cost and high resistance, making it popular in industry. Polyethylene is classified by density and chemical properties into various categories. Its mechanical properties depend on molecular weight, crystal structure, and branching type. While properties vary by grade, it generally provides good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene components are used for slides, stairs, guardrails, barriers, accessories, roofs, etc. To prevent color fading, masterbatch pigments used to color polyethylene must have a lightfastness rating of 6 or higher. The product’s wall thickness must be at least 6 mm (0.2 in) for parts subjected to pressure or friction, and at least 4 mm (0.2 in) for components used only as barriers or shade structures. Material distribution must be uniform, and wall‑thickness tolerances are ±5%. Carrier Construction The carrier construction consists of steel tubes with a minimum diameter of 114 mm (4.5 in) and a minimum wall thickness of 2 mm (0.1 in), cold‑formed in accordance with TS EN 10219‑2, TS‑6476, DIN 2394 standards, and welded by high‑frequency welding. Tubes are painted by sandblasting followed by a polyester‑based electrostatic powder‑coat. Electrostatic Powder Coating All metal parts are sandblasted to remove oil, dirt, and rust, creating a porous surface for better adhesion of the powder coating. After cleaning, the parts are pre‑treated in a 70 °C, 5 % alkaline bath for 10 minutes, then in a 50 °C, 1 % iron bath for 15 minutes, rinsed, and dried. They are then coated with a polyester‑based electrostatic powder and cured in a 200‑220 °C oven for 20 minutes (or 180‑200 °C for 20‑30 minutes). Weld seams are fully covered with a continuous coat to prevent corrosion.