Wooden Bus Stop
Price on request
SKU: PS-0070601
Height: 250 cm (98.4 in). Wood Specifications: The wood material used for manufacturing will be first‑class yellow pine (Pinus sylvestris) lumber. Wood sections will be fabricated with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in), as appropriate for the project. The wood material must meet the following criteria: - Knots: each meter may contain up to four solid knots. Knot diameters will not exceed one‑quarter of the overall piece width. No rotten, split, partially fused, or fallen knots are allowed. - Cracks: ring cracks are not permitted. Fine hairline cracks (1–2 mm (0-0.1 in)) may be present. Cracks that meet the specifications for press‑cured environments are acceptable provided they remain within tolerance limits. - Resin pockets: at most one per meter, not exceeding 10 cm (3.9 in) in length. No leaking or pulling resin, no internal shell, no rot cavities, and no insect holes. Manufacturing defects are not permitted; only deviations within the specified tolerances are allowed. Bending will not exceed 1/50 of the piece length. Impact will not exceed 1/100 of the piece width. Torsion will not exceed 2 mm (0.1 in) per meter of length. Flexure to the blade will be tolerated between 1/50 and 1/100 of the piece length. Sanding: all visible surfaces will be sanded smooth and free of splinters.