Wooden Door Entry Canopy 188(L) x 78(W) x 145(H)
Price on request
SKU: PS-70301
Seating Area: 78 x 188 cm (30.7 x 74 in) Height: 145 cm (57.1 in) Wood Specifications: - The wood material used for manufacturing will be 1st‑grade Yellow Pine (Pinus sylvestris) lumber. - Wood dimensions will be cut with a maximum tolerance of ±2 mm (0.1 in), and overall wood sizes with a maximum tolerance of ±20 mm (0.8 in), according to project specifications. - Knots: each meter may contain up to four sound knots; knot diameters will not exceed one‑quarter of the total piece width. No rot, defect, partially fused, or fallen knots will be present. - Cracks: ring cracks will not be present. Microscopic cracks (1–2 mm (0-0.1 in)) may occur. Pressure‑treated specifications may allow appropriate longitudinal and transverse cracks, provided they remain within tolerance limits. - Resin pockets: at most one per meter, not exceeding 10 cm (3.9 in) in length. No dripping or exuding resin, no inner bark, no decay cavities, and no insect holes will be present. - Manufacturing defects are not allowed; only deviations within the specified tolerances are permitted. - Bending will not exceed 1/50 of the piece length. - Impact marks will not exceed 1/100 of the piece width. - Torsion will not exceed 2 mm (0.1 in) per meter of length. - Flexure will be tolerated between 1/50 and 1/100 of the piece length. - Sanding: all visible surfaces will be sanded smooth to remove splinters.