Wooden Bus Stop
Price on request
SKU: PS-0070610
Height: 250 cm (98.4 in). Wood specifications: The raw wood material used for manufacturing will be 1st‑class Yellow Pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). Required wood characteristics: Knots – each meter may contain up to four solid knots; knot diameters will not exceed one‑quarter of the part width. No rotted, defective, partially fused, or fallen knots will be present. Cracks – no ring cracks; fine micro‑cracks (1‑2 mm (0.1 in)) may occur. Pressure‑treated environment specifications allow head and foot cracks within tolerance limits. Resin pockets – each meter may contain one resin pocket not exceeding 10 cm (3.9 in) in length; no dripping or pulling resin, inner skin, rot holes, or insect holes will be present. Manufacturing defects are not permitted; only deviations within the specified tolerances are allowed. Bending – will not exceed 1/50 of the part length. Impact – will not exceed 1/100 of the part width. Twisting – will not exceed 2 mm (0.1 in) per meter. Blade deflection – will be tolerated between 1/50 and 1/100 of the part length. Sanding – all visible surfaces will be sanded clean of splinters.