Garden Seating Set 205(L) x 140(W) x 75(H) 70779
Price on request
SKU: SS-012284
Seating Area: 140 x 205 cm (55.1 x 80.7 in) Height: 75 cm (29.5 in) Wood Features: The wood material used for manufacturing will be 1st Grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). Required wood characteristics include: - Knots: Up to four solid knots per meter, with total knot diameter not exceeding one quarter of the piece width. No rotten, split, or fallen knots. - Cracks: No ring cracks; hairline cracks (1‑2 mm (0.1 in)) may be present. Pressure‑treated cracks within specification tolerances are allowed. - Resin pockets: Maximum length 10 cm (3.9 in) per meter, at most one per meter. No dripping or pulling resin. No inner bark, rot cavities, or insect holes. No manufacturing defects beyond specified tolerances. - Bend: Deflection will not exceed 1/50 of the piece length. Impact marks will not exceed 1/100 of the piece width. - Twist: No more than 2 mm (0.1 in) per meter length. - Sword bend: Tolerated between 1/50 and 1/100 of piece length. - Sanding: All visible surfaces will be sanded smooth. Wood Carriers: Support legs will be made from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in), shaped with diamond‑tipped special blades. Seating Unit: Seat width is 30 cm (11.8 in), length 140 cm (55.1 in), seat height 45 cm (17.7 in). Seating frame parts will be made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) using diamond‑tipped special blades. The seating unit will be assembled with six pieces of at least 40 × 90 mm (1.6 x 3.5 in) wood slats and four backrest slats, fastened with galvanized screws. Table: The table measures 63 × 140 cm (24.8 x 55.1 in) and is made from at least 40 × 90 mm (1.6 x 3.5 in) pine lumber treated with pressure, shaped with diamond‑tipped special blades and an oval motif. Table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped special blades.