51506 – Wooden Playground (Eco Series)
Price on request
SKU: SS-012270
Product Technical Specifications Seating Area 570×840 cm (224 x 331 in) Safety Area 870×1140 cm (343 x 449 in) Peak Height 311 cm (122 in) Slide Connection Height 100-150 cm (39.4-59.1 in) Age Group +3 YEARS Product Spare Parts • Wooden swing A tube – 1 piece • Wooden swing carrier tube – 1 piece • Polyethylene guarded swing seat – 1 piece • Wooden swing seat – 1 piece • Wooden stair guard – 2 pieces • Stair step – 10 pieces • H:150 cm (59.1 in) wooden tower tube – 4 pieces • H:100 cm (39.4 in) wooden tower tube – 4 pieces • Wooden square platform – 2 pieces • Wooden platform guard – 4 pieces • Wooden roof – 1 piece • Wooden slide entrance – 3 pieces • H:150 cm (59.1 in) polyethylene straight slide – 1 piece • H:150 cm (59.1 in) polyethylene spiral slide – 1 piece • H:100 cm (39.4 in) polyethylene straight slide – 1 piece Carrier Construction 1. Carrier uprights are 9×9 cm (3.5 x 3.5 in) and 260 cm (102 in) long. 2. Sharp corners and edges on the wooden slats used in the carrier construction are rounded to prevent accidents. 3. Anchors at the base of the uprights are made from 10×10 cm (3.9 x 3.9 in), 2 mm (0.1 in) thick box profile steel. 4. The lower parts of the 150 cm (59.1 in) tower uprights are wrapped with 5×9 cm (2 x 3.5 in) wood pieces, 110 cm (43.3 in) long, to create the area needed for the sand pit. 5. All connection points will use stainless steel screws. The screws will be recessed inside the wooden slats and covered with polyurethane caps. 6. The wood used is pressure‑treated spruce / fir. Wooden Square Platform 1. The wooden platform measures 110×110 cm (43.3 x 43.3 in). 2. When building the platform, the carrier uprights (5×9 cm (2 x 3.5 in), 110 cm (43.3 in) long) are wrapped around the perimeter; then two wooden pieces (4×9 cm (1.6 x 3.5 in), 81.5 cm (32.1 in) long) are placed between each pair of uprights. The remaining space is filled with nine wooden pieces (4×9 cm (1.6 x 3.5 in), 100 cm (39.4 in) long) placed side by side, completing the platform. 3. The wood used is pressure‑treated spruce / fir. Wooden Roof 1. The wooden roof measures 115×115 cm (45.3 x 45.3 in) and is 41 cm (16.1 in) high. 2. There is a 152.5 cm (60 in) gap between the lower edge of the roof overhang and the platform. 3. The square roof is formed by overlapping wooden lamellas. 4. The wood used is pressure‑treated spruce / fir. Straight Slide 1. Designed to descend from the 150 cm (59.1 in) high platform with a maximum slope of 40°, never exceeding 60° at any point. 2. Total width of the slide is 65 cm (25.6 in); the sliding section is 50 cm (19.7 in) wide and 330 cm (130 in) long. 3. The side walls of the slide are 16 cm (6.3 in) high. 4. At the slide entrance, a wooden barrier ensures safe entry for children, and a 35 cm (13.8 in) flat section at the exit reduces the child’s speed. 5. Slides will be mounted to the platform with galvanized bolts, covered with injection‑molded plastic washers to hide the fasteners and increase durability. 6. The slide’s connection to the ground is made by welding a 23 cm (9.1 in) long, 88 mm (3.5 in) diameter, 2 mm (0.1 in) wall‑thick pipe into a 10×22 cm (3.9 x 8.7 in) metal plate that is 4 mm (0.2 in) thick. Spiral Slide 1. The slide attached to the 150 cm (59.1 in) high platform is manufactured as a single piece so that the slope of the sliding section never exceeds 60° and on average does not pass 40° when measured against the slide’s longitudinal axis. 2. A 40 cm (15.7 in) flat section at the slide exit reduces the child’s speed. 3. The slide’s total width is 110 cm (43.3 in), length 190 cm (74.8 in), and the sliding section is 45 cm (17.7 in) wide. 4. The side walls of the slide are 20 cm (7.9 in) high. 5. Slides will be mounted to the platform with galvanized bolts, concealed with injection‑molded plastic washers for a clean look and longer life. 6. The slide’s ground connection is made by welding a 23 cm (9.1 in) long, 88 mm (3.5 in) diameter, 2 mm (0.1 in) wall‑thick pipe into a 10×22 cm (3.9 x 8.7 in) metal plate that is 4 mm (0.2 in) thick. Wave Slide 1. Designed to descend from the 150 cm (59.1 in) high platform with a maximum slope of 40°, never exceeding 60° at any point. 2. Total width of the slide is 65 cm (25.6 in); the sliding section is 40 cm (15.7 in) wide and 320 cm (126 in) long. 3. The side walls of the slide are 16 cm (6.3 in) high. 4. At the slide entrance, a wooden barrier ensures safe entry for children, and a 35 cm (13.8 in) flat section at the exit reduces the child’s speed. 5. Slides will be mounted to the platform with galvanized bolts, concealed with injection‑molded plastic washers for a clean look and longer life. 6. The slide’s ground connection is made by welding a 23 cm (9.1 in) long, 88 mm (3.5 in) diameter, 2 mm (0.1 in) wall‑thick pipe into a 10×22 cm (3.9 x 8.7 in) metal plate that is 4 mm (0.2 in) thick. Swing 1. Swing seating area is 108×270 cm (42.5 x 106 in), height 204 cm (80.3 in). 2. Swing carrier legs are 9×9 cm (3.5 x 3.5 in) and 208.5 cm (82.1 in) long, made from wood. At the points where the legs touch the ground, 10×10 cm (3.9 x 3.9 in) box‑profile steel plates are used. 3. The piece that connects the swing carrier legs is 9×9 cm (3.5 x 3.5 in) and 260 cm (102 in) long, also made from wood. It includes two swing connection fittings for each swing. The connection point to the carrier legs also uses 10×10 cm (3.9 x 3.9 in) box‑profile steel plates. 4. There are two swing seats. One seat is made of polyethylene, closed on three sides and equipped with a front guard for safety. The other seat has no guard and is made of rubber. 5. When stationary, the guarded swing is 35 cm (13.8 in) above the ground, and the open swing is 40 cm (15.7 in) above the ground. 6. Swing chains are double‑row and galvanized. Wooden Stair 1.