Wooden Park Bus
Price on request
SKU: SS-012134
Height: 250 cm (98.4 in). Wood Specifications: The wood material to be used for manufacturing will be first‑class yellow pine (Pinus sylvestris) lumber. Wood sections will be fabricated with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm, in accordance with the project requirements. Wood characteristics for manufacturing include knots: each meter may contain up to four sound knots, and knot diameters will not exceed one‑quarter of the total piece width. Rotten, defective, partially fused, or fallen knots will not be present. Cracks: Ring cracks will not be present. Microscopic cracks (1–2 mm (0-0.1 in)) may occur. Pressure‑treated conditions may allow suitable axial and longitudinal cracks, provided they remain within tolerance limits. Resin pockets: at most one pocket per meter, not exceeding 10 cm (3.9 in) in length. No leaking or drawing resin, no inner shell, no rot cavities, and no insect holes will be present. Manufacturing defects will be absent; deviations are limited to the specified tolerances. Bending will not exceed 1/50 of the piece length. Impact will not exceed 1/100 of the piece width. Twisting will not exceed 2 mm (0.1 in) per meter of length. Deflection under load will be tolerated between 1/50 and 1/100 of the piece length. All visible surfaces will be sanded clean of splinters.