New Generation Playground Play Set · SS-012091
Price on request
SKU: SS-012091
Product Features: Usage Area: 916 × 920 cm (361 x 362 in) Safety Area: 920 × 924 cm (362 x 364 in) Age Range: 5‑12 years Child Capacity: 16‑24 Fall Height: 213.36 cm (84 in) Post Diameter: 11.43 cm (4.5 in) Spare Parts: H:245 cm (96.5 in) single‑row gravel bridge – 1 piece H:245 cm (96.5 in) semi‑circular climbing element – 1 piece H:245 cm (96.5 in) curved rotating element – 1 piece H:245 cm (96.5 in) single‑post tilted climbing element – 1 piece H:60 cm (23.6 in) single gravel stone – 3 pieces Polyethylene Products: Low‑density linear polyethylene (LLDPE) is a thermoplastic used in many applications. It is a semi‑permeable, pliable, and highly durable polymer that is inexpensive and highly resistant, making it popular in industry. Polyethylene is classified by density and chemical properties. Its mechanical characteristics depend on molecular weight, crystal structure, and branching type. Though properties vary by grade, it generally offers good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene is used for slides, stairs, handrails, barriers, accessories, roofing, etc. To prevent color fading, masterbatch pigments used for coloring polyethylene must have a lightfastness rating of 6 or higher. The product’s wall thickness must be at least 6 mm (0.2 in) in areas exposed to pressure and friction, and at least 4 mm (0.2 in) for components serving as barriers or shade structures that are not load‑bearing. Material must be evenly distributed to achieve uniform thickness. Dimensional tolerance for thickness and measurements is ±5%. Electrostatic Powder Coating: All metal parts will be sandblasted to remove oil, dirt, and rust, creating pores for better paint adhesion. Fine steel beads will be injected with compressed air to open additional pores and clean the surfaces before painting. After manufacturing, metal components will be coated with a polyester‑based electrostatic powder and cured in a 200‑220 °C oven for 20 minutes. Following fabrication, parts will undergo a 10‑minute, 70 °C, 5% concentration oil‑removal bath, then a 15‑minute, 50 °C, 1% concentration zinc bath. After rinsing and drying, the entire assembly will be powder‑coated with a durable polyester‑based outdoor coating and cured at 180‑200 °C for 20‑30 minutes. All welds will be masked and the whole unit painted in one continuous coat to prevent corrosion. Product Overview (Item 53840): The New Generation Playground Play Set is a comprehensive play area built from durable components that encourage children to burn healthy energy through challenging climbing and balance activities. One end of the playground features a floating bridge with a knotted spring‑shaped floor design reminiscent of a turtle shell. Children can spring upward from the bridge and grasp the steps of an overhead rotating platform to spin using their momentum or a friendly push from an adult. Adjacent to this feature is a curved gravel bridge composed of a long, circular stairway that encourages careful coordination for kids who wish to avoid touching the ground. At the opposite end of these stairs stands a vertical ring tower that can be climbed from its center upward or by scaling its outer edges. From the tower, players can finish the circuit by sliding down the shaded “saddle slide” without having to run back. Key Playground Elements: - Slide (standard) - Spiral slide - Tube slide - Swing - Seesaw - Merry‑go‑round - Spring rider - Playground play set - Picnic gazebo - Pergola - Gazebo - Seat - Litter bin - Pull‑up bar - Climbing wall - Rubber safety flooring - Outdoor fitness equipment - Castle (play structure) - Money box - Sphere - Helicopter - Park bus - Chess table - Fishing rod