Next Generation Playground Play Set · SS-012080
Price on request
SKU: SS-012080
Product Technical Specifications Usage Area: 1315×1146 cm (518 x 451 in) Safety Area: 1320×1150 cm (520 x 453 in) Age Group: 5+ Capacity: 35-45 Persons Number of Slides: 1 Product Spare Parts Polyethylene roof – 1 piece Polyethylene slide barrier – 1 piece Polyethylene platform barrier – 1 piece 116×116 PE composite square platform – 3 pieces H:100 cm (39.4 in) Polyethylene straight slide – 1 piece H:100 cm (39.4 in) PE composite closed stairs H:100 cm (39.4 in) Metal stair railing – 1 piece H:100 cm (39.4 in) Tower pipe – 10 pieces Ladder bridge – 1 piece Tower X‑Y play panel – 1 piece Net bridge – 1 piece H:60 cm (23.6 in) Single forked bar – 5 pieces H:245 cm (96.5 in) Cable‑tied rotating element – 1 piece H:245 cm (96.5 in) Single‑shaft cable inverted horizontal climber – 1 piece H:245 cm (96.5 in) Cimet passage climbing element – 1 piece Polyethylene Products Low‑density linear polyethylene (LLDPE) is a thermoplastic used in various products. It is semi‑permeable, pliable, and highly durable while offering low cost and high resistance, making it popular in industry. Polyethylene is classified by density and chemical properties. Its mechanical characteristics depend on molecular weight, crystalline structure, and branching type. Although properties vary by grade, it generally provides excellent resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and superior chemical resistance. Polyethylene is used to manufacture slides, stairs, railings, barriers, accessories, roofs, etc. To prevent color fading, masterbatch pigments used for coloring polyethylene must have a lightfastness rating of 6 or higher. The product wall thickness must be at least 6 mm (0.2 in) for components exposed to pressure and friction, and at least 4 mm (0.2 in) for non‑load‑bearing barriers and shade structures. Material distribution must be uniform, and thickness tolerances are ±5%. Electrostatic Powder Coating Process All metal components will be prepared by sandblasting to remove oil, dirt, and rust, creating a porous surface for better paint adhesion. A fine bead material will be sprayed with compressed air to open pores and clean the metal surface. After manufacturing, metal parts will be coated with a polyester‑based electrostatic powder and baked in a 200‑220 °C oven for 20 minutes. Subsequently, parts will undergo a 10‑minute, 70 °C, 5% concentration degreasing bath, followed by a 15‑minute, 50 °C, 1% concentration iron bath, then rinsed and dried. Finally, the entire assembled product will be powder‑coated with a weather‑resistant polyester system and cured in a 180‑200 °C oven for 20‑30 minutes. Welds will be fully protected by painting the whole unit after welding to prevent corrosion. Product Overview (Code 53870) The Next Generation Playground Play Set features a central pine‑tree peak that blends natural interaction with vigorous physical activity. All activities promote healthy muscle development, agility, coordination, and skill improvement. Children will practice moving effortlessly from one activity to another without stopping or touching the ground, turning them into confident playground adventurers.