New Generation Children's Playground Play Set · SS-012079
Price on request
SKU: SS-012079
Product Technical Features Installation Area: 1168×1089 cm (460 x 429 in) Safety Area: 1172×1093 cm (461 x 430 in) Age Group: 3–12 years Capacity: 7–10 children Slides: 1 unit Plastic components are made from LLDPE (Linear Low‑Density Polyethylene) using rotational molding. All metal tubes are galvanized tubes, 2 mm (0.1 in) thick, complying with GB/T 13793‑2008. All platforms are fabricated from 2 mm (0.1 in) thick galvanized sheet steel meeting GB/T 13793‑2008. The product will be made from pure polyester raw material. The dry film thickness is maintained between 50–70 µm. Adhesion testing is performed with cross‑scanning cutting tools according to ASTM D‑3359. Galvanized/ stainless‑steel/ Allen bolts, button‑head Allen bolts and nuts, nylon lock nuts, and PVC bolt caps are used. All open tube ends are sealed with GI/PVC caps for user safety. Spare Parts: H:60cm (23.6 in) Single Spike Bar – 12 pcs H:60cm (23.6 in) Triangular Rotating Element – 1 pc H:245cm (96.5 in) Single Circular Inclined Spike Bridge – 1 pc H:245cm (96.5 in) Rope Cable Bridge – 1 pc H:245cm (96.5 in) Cable Square Net Climber – 1 pc H:245cm (96.5 in) Standing Rotating Unit – 1 pc H:245cm (96.5 in) Rock Climbing Unit – 3 pcs H:245cm (96.5 in) Floating Tunnel Climbing Element – 1 pc H:245cm (96.5 in) Circular Rock Climbing Element – 1 pc Polyethylene Products: Low or medium density linear polyethylene (LLDPE) is a thermoplastic used in various products. It is a semi‑permeable, pliable, and highly durable polymer that offers low cost and high resistance, making it popular in industry. Mechanical properties depend on molecular weight, crystal structure, and branching type. Despite variations, it provides good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene is used in slides, stairs, railings, barriers, accessories, roofing, etc. To prevent colour fading, masterbatch pigments used for coloring must have a lightfastness rating of 6 or higher. Edge thickness must be at least 6 mm (0.2 in) for parts exposed to pressure and friction, and at least 4 mm (0.2 in) for non‑load‑bearing barrier or shade structures. Thickness tolerance is ±5%. Electrostatic Powder Coating: All metal components are first cleaned by sandblasting to remove oil, dirt, and rust, creating a porous surface for better paint adhesion. Fine steel beads are then sprayed with pressurized air to open pores and eliminate contaminants. After manufacturing, metal parts are coated with polyester‑based electrostatic powder and cured in a 200–220 °C oven for 20 minutes. Subsequently, components undergo a 10‑minute, 70 °C, 5 % concentration degreasing bath, followed by a 15‑minute, 50 °C, 1 % concentration iron‑phosphate dip. After rinsing and drying, the parts are coated with durable polyester‑based outdoor powder paint and cured at 180–200 °C for 20–30 minutes. All welds are fully coated after welding to prevent corrosion.