New Generation Children's Playground · SS-012077
Price on request
SKU: SS-012077
Technical Specification PRODUCT FEATURES Use Area: 1505 × 1102 cm (593 x 434 in) Safety Area: 1510 × 1106 cm (594 x 435 in) Age Range: 5–12 years Capacity: 34 and 42 children Equipment Weight: 612.34 kg (1350 lb) Fall Height: 245 cm (96.5 in) Installed Dimensions: 942.5 × 942.5 cm (371 x 371 in) Use Area (alternative): 1320 × 1320 cm (520 x 520 in) Pole Diameter: 11.43 cm (4.5 in) Number of Slides: 1 SPARE PARTS - 245 cm (96.5 in) square climbing unit – 1 piece - 60 cm (23.6 in) single gravel stone – 4 pieces - 245 cm (96.5 in) rock climbing unit – 3 pieces - 245 cm (96.5 in) single‑pillar inclined gravel bridge – 1 piece - 245 cm (96.5 in) standing rotating unit – 1 piece - Net bridge – 1 piece POLYETHYLENE PRODUCTS Low‑density linear polyethylene (LLDPE) is a thermoplastic used in various products. It is semi‑permeable, pliable and very durable, offering low cost and high resistance, making it popular in industry. Based on density and chemical properties, polyethylene is classified into several categories. Mechanical properties depend on molecular weight, crystal structure and branching type. Although properties vary, it generally provides good resistance to outdoor conditions and moisture, flexibility, moderate mechanical strength and excellent chemical resistance. Polyethylene is used to manufacture slides, ladders, railings, barriers, accessories, roofing, etc. To prevent colour fading, masterbatch pigments used for colouring polyethylene must have a lightfastness rating of 6 or higher. The product’s core thickness must be at least 6 mm (0.2 in) where the material is exposed to pressure and friction, and at least 4 mm (0.2 in) for components that are not pressure‑bearing such as barriers and shading units. Thickness must be uniform with a dimensional tolerance of ±5 %. ELECTROSTATIC POWDER COATING All metallic components are prepared by sandblasting to remove oil, dirt and rust, creating a porous surface for better paint adhesion. Fine steel beads are blown onto the surface with compressed air to open additional pores. After fabrication, metal parts are coated with a polyester‑based electrostatic powder and cured at 200–220 °C for 20 minutes. The parts are then rinsed in a 70 °C, 5 % degreasing bath for 10 minutes, followed by a 50 °C, 1 % iron bath for 15 minutes, rinsed again and dried. Finally, the entire assembly is painted in a single coat using a durable outdoor polyester powder, baked at 180–200 °C for 20–30 minutes. Weld seams are protected from corrosion by painting the entire unit after welding. DESCRIPTION Model 53880 – New Generation Children’s Playground is an active entertainment circuit where kids can play and explore. It features three rock‑climbing sections that add an unconventional climbing experience to the classic rock‑climbing challenge. For those who prefer rope structures, there is a net climber and a spring‑rider rope climber. Balance and coordination are tested with two S‑balance bridges, a zig‑zag bridge, a challenging bridge, an inclined bridge, a gravel path, and a series of inclined asymmetric bars. Children who simply want to spin around can use either a single gravel stone with an overhead rotary unit or a fixed rotary unit. A unique saddle slide provides an additional sliding experience. All obstacles are connected in a single composite structure, allowing children to move smoothly from one activity to the next without having to slow down.