New Generation Playground
Price on request
SKU: PS-0053890
Product Technical Specifications Usage Area: 753×772 cm (296 x 304 in) Safety Area: 758×776 cm (298 x 306 in) Age Group: 5+ Capacity: 40-65 persons Product Spare Parts H:245cm (96.5 in) single‑wheel cross‑linked climbing element – 1 piece H:245cm (96.5 in) chain‑linked net climbing element – 1 piece H:245cm (96.5 in) 4‑wheel swing element – 1 piece H:245cm (96.5 in) single‑row broken bridge – 1 piece H:60cm (23.6 in) single broken stone – 9 pieces H:245cm (96.5 in) perforated climbing unit – 3 pieces H:245cm (96.5 in) 45‑degree slanted climbing element – 1 piece H:245cm (96.5 in) pull‑up bar climbing element – 1 piece H:245cm (96.5 in) inclined climbing element – 1 piece Silinder balance element – 1 piece Polyethylene Products Low‑density linear polyethylene (LLDPE – Linear Low Density Polyethylene) is a thermoplastic used in various products. It is a semi‑permeable, softening, and highly durable polymer that is favored in industry for its low cost and high resistance. Polyethylene is classified into categories based on density and chemical properties. Its mechanical characteristics depend on molecular weight, crystal structure, and branching type. Although properties vary by type, generally it offers good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene products are used in the manufacture of slides, stairs, railings, barriers, accessories, roofs, etc. To prevent color fading, masterbatch pigments used for coloring polyethylene must have a lightfastness test value of 6 or higher. Product wall thickness must be at least 6 mm (0.2 in) for areas subjected to pressure and friction, and at least 4 mm (0.2 in) for barriers and shading elements not exposed to pressure. Material distribution must be uniform to achieve consistent thickness. Product wall thickness and dimensional tolerance are ±5%. Electrostatic Powder Coating Process All metal components will be prepared for painting by sandblasting to remove oil, dirt, and rust, creating pores for better paint adhesion. Fine steel beads will be propelled with compressed air to open pores and remove contaminants. After manufacturing, metal parts will be coated with a polyester‑based electrostatic powder, then cured in a 200‑220 °C oven for 20 minutes. Following coating, parts will undergo a 10‑minute degreasing bath at 70 °C with 5% solution, then a 15‑minute pickling bath at 50 °C with 1% solution, followed by rinsing and drying. The final exterior coating will be a durable polyester‑based powder applied outdoors, cured at 180‑200 °C for 20‑30 minutes. Weld seams will be fully painted after welding to prevent corrosion. Model 53890 – New Generation Playground features a central pine tree peak that blends nature contact with a robust play structure designed to encourage physical fitness.