Next Generation Playground · SS-012074
Price on request
SKU: SS-012074
Product Technical Features Usage Area: 964 × 786 cm (380 x 309 in) Safety Area: 968 × 790 cm (381 x 311 in) Age Group: 5+ Capacity: 40‑78 children Spare Parts: - Height 245 cm (96.5 in) – single‑row welded bridge (2 pcs) - Height 60 cm (23.6 in) – single welded cart (12 pcs) - Height 245 cm (96.5 in) – flat‑step horizontal ladder (1 pc) - Height 245 cm (96.5 in) – flat snake‑loop ladder (1 pc) - Height 245 cm (96.5 in) – single‑pole rope‑climbing wall (1 pc) - Height 245 cm (96.5 in) – double parallel bar ladder (1 pc) - Height 245 cm (96.5 in) – flat trapezoid loop ladder (1 pc) - Height 245 cm (96.5 in) – three‑wheel rocking ladder (1 pc) - Height 245 cm (96.5 in) – rock climbing unit (3 pcs) - Height 245 cm (96.5 in) – round horizontal ladder (1 pc) Polyethylene Products: Low‑density linear polyethylene (LLDPE) is a thermoplastic used in a variety of applications. It is a semi‑permeable, pliable, and highly durable polymer that is popular in industry due to its low cost and high resistance. Based on density and chemical properties, polyethylene is classified into several categories. Its mechanical properties depend on molecular weight, crystal structure, and branching type. Although properties vary by grade, polyethylene generally offers good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene is used to manufacture slides, ladders, railings, barriers, accessories, roofing, and more. To prevent color fade, the masterbatch pigments used for coloring polyethylene must have a light fastness rating of 6 or higher. The material’s wall thickness must be at least 6 mm (0.2 in) for components exposed to pressure and friction, and a minimum of 4 mm (0.2 in) for non‑load‑bearing barriers and shade structures. Thickness must be uniform, and dimensional tolerances are ±5%. Electrostatic Powder Coating Process: All metal parts are prepared by sandblasting to remove oil, grease, and rust, creating a porous surface for better paint adhesion. A fine‑ball coating material is then sprayed with pressurized air to open pores and clean the metal surface. After fabrication, metal components are coated with polyester‑based electrostatic powder and cured in a 200‑220 °C oven for 20 minutes. Following this, parts undergo a 10‑minute, 70 °C dip in a 5% degreasing bath, then a 15‑minute, 50 °C dip in a 1% iron bath. After rinsing and drying, the components receive a final polyester‑based powder coating applied outdoors, baked at 180‑200 °C for 20‑30 minutes. All welds are fully coated after welding to prevent corrosion.