Picnic Table (Wooden) 195(L)×195(W)×75(H)
Price on request
SKU: SS-011496
Seating Area: 195 x 195 cm (76.8 x 76.8 in) Height: 75 cm (29.5 in) Wood Features: The wood material used for manufacturing will be first‑class Yellow Pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). Required wood characteristics: Knots – each piece may contain up to four sound knots; knot diameters will not exceed one‑quarter of the part’s width. No rot, decay, partially split, or fallen knots will be present. Cracks – no ring cracks; fine hairline cracks (1‑2 mm (0.1 in)) may occur. Pressure‑treated wood may exhibit acceptable head‑and‑body cracks within tolerance limits. Resin pockets – at most one per piece, not longer than 10 cm (3.9 in); no dripping or sucking resin. No inner bark, rot cavities, insect holes, or manufacturing defects; only permissible tolerances. Bending – will not exceed 1/50 of the part length. Impact marks – will not exceed 1/100 of the part width. Twisting – will not exceed 2 mm (0.1 in) per meter of length. Bow‑deflection – tolerated between 1/50 and 1/100 of the part length. Sanding – all visible surfaces will be sanded smooth. Wood Carriers: Carrier legs will be made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped special knives and engraved motifs. Seating Unit: The seat width is 30 cm (11.8 in), length 140 cm (55.1 in), seat height 45 cm (17.7 in). The seat carrier components will be made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped knives and engraved motifs. The seating unit will use six pine slats (minimum 40 × 90 mm (1.6 x 3.5 in)) and four back‑rest slats (minimum 40 × 90 mm (1.6 x 3.5 in)) attached to the carrier wood with galvanized screws. Table: The tabletop measures 63 × 140 cm (24.8 x 55.1 in) and will be made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), pressure‑treated, cut with diamond‑tipped knives and oval motifs. The table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped knives and engraved motifs.