Wooden Two‑Room Gazebo 300(L) x 900(W) x 330(H)
Price on request
SKU: PS-0070270
Seating area: 300 × 900 cm (118 x 354 in). Roof area: 370 × 970 cm (146 x 382 in). Height: 330 cm (130 in). Wood specifications: The lumber used for manufacturing will be first‑class yellow pine (Pinus sylvestris) timber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and dimensions with a maximum tolerance of ±20 mm (0.8 in). The wood material must meet the following criteria: knots – each meter may contain up to four solid knots, with knot diameters not exceeding one‑quarter of the total piece width; no rot, defective, partially fused, or fallen knots are allowed. Cracks – no ring cracks; hairline cracks of 1–2 mm (0-0.1 in) may be present, as well as pressure‑treated shrinkage cracks within tolerance limits. Resin pockets – at most one per meter, not exceeding 10 cm (3.9 in) in length; no dripping or flowing resin, no inner shell, rot cavities, or insect holes. Manufacturing defects are not permitted; only deviations within the specified tolerances are acceptable. Bending will not exceed 1/50 of the piece length; impact marks will not exceed 1/100 of the piece width. Twisting will not exceed 2 mm (0.1 in) per meter length. Edge bending is tolerated between 1/50 and 1/100 of the piece length. All visible surfaces will be sanded smooth to remove any splinters. Anchoring: Flanged brackets measuring 18 × 13 × 3 mm (0.7 x 0.5 x 0.1 in) will be welded to the bottom of the carrier legs, with 15 × 8 × 2 mm (0.6 x 0.3 x 0.1 in) plates receiving two bolt or anchor holes (13 × 8 × 3 mm (0.5 x 0.3 x 0.1 in)) and three 6 mm (0.2 in) screw holes each. The brackets will be welded on at least two sides of the flanges. Six special screws will be installed per leg to connect the uprights, and two steel‑dowel screws per leg will secure the structure to the ground. All metal components will be powder‑coated with a polyester‑based finish. Seating group is not included.