Picnic Table (Octagonal) 228(L)x228(W)x75(H)
Price on request
SKU: PS-0070502
Seating Area: 228 x 228 cm (89.8 x 89.8 in) Height: 80 cm (31.5 in) Wood Features: The wood material used for manufacturing will be 1st‑grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be fabricated with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). Required wood qualities include: Knots – Each piece may contain up to four solid knots; knot diameters will not exceed one quarter of the overall part width. There will be no rotten, split, or fallen knots. No ring cracks. Microscopic cracks (1‑2 mm (0.1 in)) may be present. Pressure‑treated specifications may allow head and foot cracks within tolerance limits. Resin pockets – No more than one per piece, not exceeding 10 cm (3.9 in) in length; no leaking or pulling resin. No inner bark, rot cavities, insect holes, or manufacturing defects; only tolerances may cause deviations. Deflection – Will not exceed 1/50 of the member length. Impact – Will not exceed 1/100 of the member width. Twist – Will not exceed 2 mm (0.1 in) per meter of length. Bow‑deflection – Will be tolerated between 1/50 and 1/100 of the member length. Sanding – All visible surfaces will be sanded smooth. Wood Carriers: Carrier legs will be made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped special blades and featuring a motif. Seating Units: Four circular seating units surround the table, each with a seat width of 30 cm (11.8 in) and seat height of 45 cm (17.7 in). The seating unit carriers are fabricated from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped special blades. Seat slats are at least 40 × 90 mm (1.6 x 3.5 in) wood slats fastened to the carrier parts with galvanized screws. Table: The tabletop is an oval‑motif, pressure‑treated piece made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), with a diameter of 130 cm (51.2 in). Table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) and cut with diamond‑tipped special blades.