Octagonal Picnic Table (228 L x 228 W x 75 H)
Price on request
SKU: SS-011483
Seating Area: 228 × 228 cm (89.8 x 89.8 in) Height: 80 cm (31.5 in) Wood Features: - Manufactured from 1st‑class Yellow Pine (Pinus sylvestris) lumber. - Cut dimensions tolerance ±2 mm (0.1 in); overall size tolerance ±20 mm (0.8 in). - Each piece may contain up to four sound knots, each not exceeding one‑quarter of the part width. - No rot, decay, split, or missing knots; no ring cracks. Microscopic cracks (1‑2 mm (0.1 in)) are permitted within tolerance. - Pressure‑treated wood may have permissible axial and radial cracks within the specified limits. - Resin pockets: at most one per piece, no longer than 10 cm (3.9 in), with no dripping or sucking resin. No inner core, rot cavities, or insect holes. - Manufacturing defects are limited to the stated tolerances. Performance Tolerances: - Bending deflection will not exceed 1/50 of the member length. - Impact stress will not exceed 1/100 of the member width. - Twist will not exceed 2 mm (0.1 in) per meter of length. - Compression deflection tolerated between 1/50 and 1/100 of the member length. - All visible surfaces are sanded smooth. Wooden Supports: - Support legs are crafted from pine lumber, minimum 40 × 90 mm (1.6 x 3.5 in), shaped with diamond‑tipped knives and decorative motifs. Seating Units: - Four circular seats surround the table, each 30 cm (11.8 in) wide and 45 cm (17.7 in) high. - Seat supports use the same 40 × 90 mm (1.6 x 3.5 in) pine, with decorative diamond cuts, fastened by galvanized screws. Table: - 130 cm (51.2 in) diameter table made from 40 × 90 mm (1.6 x 3.5 in) pine lumber with an oval decorative motif cut by diamond‑tipped knives. - Table legs are 75 cm (29.5 in) high, fabricated from the same material and treatment.