Picnic Table (Wooden) 145(L) x 170(W) x 75(H)
Price on request
SKU: SS-011482
Seating area: 140 × 180 cm (55.1 x 70.9 in); Height: 75 cm (29.5 in). Wood specifications: The timber used for production will be first‑grade Yellow Pine (Pinus sylvestris) lumber. Wood dimensions will be cut with a tolerance of ± 2 mm (0.1 in), and overall piece dimensions with a tolerance of ± 20 mm (0.8 in). Required wood qualities include: - Knots: Up to four solid knots per piece, each not exceeding one‑quarter of the component width. No rot, splits, or fallen knots are allowed. - Cracks: No ring cracks; fine hairline cracks (1‑2 mm (0.1 in)) may be present within specification limits. - Resin pockets: No resin longer than 10 cm (3.9 in) per piece; only one per piece is allowed, with no dripping or pulling resin. - No interior rot, insect holes, or manufacturing defects beyond the stated tolerances. - Bending: Deflection will not exceed 1/50 of the piece length. - Impact: Impact marks will not exceed 1/100 of the piece width. - Twisting: Twist will not exceed 2 mm (0.1 in) per meter of length. - Slope: Deflection will be tolerated between 1/50 and 1/100 of the piece length. - Sanding: All visible surfaces will be sanded clean of splinters. Wood carriers: Support legs will be fabricated from pine lumber measuring at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped specialty knives and given a decorative motif. Seating unit: The seating unit measures 30 cm (11.8 in) wide, 140 cm (55.1 in) long, and 45 cm (17.7 in) high. Its supporting parts are made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), shaped with diamond‑tipped knives and a decorative motif. The seating unit will be assembled with six pieces of 40 × 90 mm (1.6 x 3.5 in) wood for the seat and four pieces of the same size for the backrest, all fastened with galvanized screws. Table: The tabletop measures 63 × 140 cm (24.8 x 55.1 in) and is made from 40 × 90 mm (1.6 x 3.5 in) pine lumber treated with a pressure‑impregnation process, shaped with diamond‑tipped knives, and given an oval decorative motif. The table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped knives and featuring the same decorative motif.