Picnic Table (Wooden) 145(L)×170(W)×75(H)
Price on request
SKU: PS-0070503
Seating Area: 140 x 180 cm (55.1 x 70.9 in) Height: 75 cm (29.5 in) Wood Specifications: The wood material used for manufacturing will be first‑grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be fabricated with a maximum tolerance of (±) 2 mm (0.1 in), and overall wood dimensions with a maximum tolerance of (±) 20 mm (0.8 in). Required wood characteristics include: - Knots: Each piece may contain up to four solid knots. The total knot diameter will not exceed one‑quarter of the piece width. No rot, insect damage, or split wood will be present. No cracked, partially split, or fallen knots. - Cracks: No ring cracks. Microscopic cracks (1–2 mm (0-0.1 in)) may be present. Pressure‑treated wood may show occasional head‑ or side‑cracks within tolerance limits. - Resin Pockets: At most one resin pocket per piece, not exceeding 10 cm (3.9 in) in length. No dripping or pulling resin, no inner bark, rot cavities, or insect holes. - Manufacturing Defects: None beyond the specified tolerances. - Bending: Deflection will not exceed 1/50 of the member length. - Impact: Impact marks will not exceed 1/100 of the member width. - Twisting: Twist will not exceed 2 mm (0.1 in) per meter of length. - Compression Bend: Deflection will be between 1/50 and 1/100 of the member length. - Sanding: All visible surfaces will be sanded smooth and free of splinters. Wood Supports: Support legs will be made from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped special blades and featuring a decorative motif. Seating Unit: The seating unit measures 30 cm (11.8 in) wide, 140 cm (55.1 in) long, with a seat height of 45 cm (17.7 in). Its support components are also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped blades and bearing a decorative motif. The seating unit will be assembled with six pieces of 40 × 90 mm (1.6 x 3.5 in) wood slats and four back‑rest slats, fastened to the wooden supports with galvanized screws. Table: The tabletop measures 63 × 140 cm (24.8 x 55.1 in) and will be constructed from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), pressure‑treated, and cut with diamond‑tipped blades featuring an oval motif. Table legs are 75 cm (29.5 in) high, made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped blades and bearing a decorative motif.