Wood – Picnic Table (Round) 228(L)x228(W)x75(H)
Price on request
SKU: PS-70502
Seating Area: 228 x 228 cm (89.8 x 89.8 in) Height: 75 cm (29.5 in) Wood Features: The wood raw material for manufacturing will be 1st‑grade yellow pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). The wood used in production must meet the following criteria: knots – each piece may contain up to 4 solid knots; knot diameters will not exceed one‑quarter of the piece width. No rotten, split, or shifted knots will be present. Cracks – no ring cracks; fine hair cracks (1‑2 mm (0.1 in)) may be present. Pressure‑treated wood may contain permissible head and foot cracks within tolerance limits. Resin pockets – at most one per piece, not exceeding 10 cm (3.9 in) in length; no dripping or sucking resin. No bark, decay cavities, insect holes, or manufacturing defects; only deviations within the specified tolerances. Deflection – will not exceed 1/50 of the piece length. Impact – will not exceed 1/100 of the piece width. Twisting – will not exceed 2 mm (0.1 in) per meter. Bow deflection – will be tolerated between 1/50 and 1/100 of the piece length. Sanding – all visible surfaces will be sanded smooth. Wood Carriers: Carrier legs will be made from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑point special knives and bearing a decorative motif. Seating Units: Four circular seating units surround the table, each with a seating width of 30 cm (11.8 in), length 75 cm (29.5 in), and seat height 45 cm (17.7 in). The carrier parts of the seating units are made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑point special knives with a motif. The seat slats are also at least 40 × 90 mm (1.6 x 3.5 in) wood slats, mounted to the carrier wood with galvanized screws. Table: The tabletop is an oval‑motif, pressure‑treated piece made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), with a diameter of 75 cm (29.5 in). The table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑point special knives and bearing the motif.