Garden Furniture Seating Set 250(L) x 248(W) x 75(H)
Price on request
SKU: PS-0070794
Seating Area: 300 x 315 cm (118 x 124 in) Height: 75 cm (29.5 in) • Wood Characteristics: The wood material used for manufacturing will be first‑grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and wood dimensions with a maximum tolerance of ±20 mm (0.8 in). The wood material must meet the following specifications: Knots: Each piece may contain up to 4 sound knots. The total knot diameter will not exceed one‑quarter of the piece width. No rot, split, partially delaminated or fallen knots will be present. Splits: No ring splits. Hairline splits of 1–2 mm (0-0.1 in) may be present. Pressure‑preserved conditions may allow permissible head and foot cracks within tolerance limits. Resin pockets: At most one resin pocket per piece, not longer than 10 cm (3.9 in). No dripping or sucking resin. No inner bark, rot cavities, insect holes, or manufacturing defects; only allowed deviations within specified tolerances. Bending: Deflection will not exceed 1/50 of the piece length. Impact: Impact marks will not exceed 1/100 of the piece width. Torsion: Twist will not exceed 2 mm (0.1 in) per meter of length. Slope to blade: Deviation between 1/50 and 1/100 of the piece length will be tolerated. Sanding: All visible surfaces will be sanded smooth. • Wood Supports: Support legs will be made from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in), cut with diamond‑tipped special knives and given a motif. • Seating Units: Four seating units will surround the table. Seat width is 30 cm (11.8 in); the short seat length is 140 cm (55.1 in), the long backrest seat length is 160 cm (63 in), and seat height is 45 cm (17.7 in). Seating frame parts will be made from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped special knives. Laths will be at least 40 × 90 mm (1.6 x 3.5 in) wood laths fastened to the frame with galvanized screws. • Table: The table will be 160 × 140 cm (63 x 55.1 in), made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped special knives and an oval motif. Table legs will be 75 cm (29.5 in) high, made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped special knives and a motif.