Wood – Wooden Round Table Set 125(Dia)x75(H)
Price on request
SKU: SS-011397
Seating Area: 125 cm (49.2 in) x 125 cm (49.2 in) Height: 75 cm (29.5 in) Wood Characteristics: The wood material used for manufacturing will be 1st class yellow pine (Pinus sylvestris) lumber. Wood sections will be produced with a maximum tolerance of ±2 mm (0.1 in), and overall dimensions with a maximum tolerance of ±20 mm (0.8 in). Required wood qualities include: - Knots: Up to four solid knots per meter, total knot diameter not exceeding one quarter of the piece width. No rotten, split, or fallen knots. No severe cracks; only fine hairline cracks (1‑2 mm (0.1 in)) may be present. Pressure‑treated cracks may occur within tolerance limits. - Resin pockets: No longer than 10 cm (3.9 in) per meter, at most one per meter. No leaking or pulling resin. No internal shell, rot cavities, or insect holes. No manufacturing defects beyond specified tolerances. - Deflection: Will not exceed 1/50 of the piece length. Impact marks will not exceed 1/100 of the piece width. - Twist: Will not exceed 2 mm (0.1 in) per meter. - Bow deflection: Tolerated between 1/50 and 1/100 of the piece length. - Sanding: All visible surfaces will be sanded smooth. Wood Carriers: The supporting legs will be made from pine lumber sized at minimum 40 × 90 mm (1.6 x 3.5 in) and cut with diamond‑tipped special knives featuring a motif.