Wood – Rectangular Table (Profile Leg) 195(L) x 80(W) x 75(H)
Price on request
SKU: SS-011396
Seating Area: 195 x 80 cm (76.8 x 31.5 in) Height: 75 cm (29.5 in) Wood Characteristics: The wood material used for manufacturing will be first‑class yellow pine (Pinus sylvestris) lumber. Wood sections will be cut with a maximum tolerance of ±2 mm (0.1 in), and overall dimensions with a maximum tolerance of ±20 mm (0.8 in). The wood material must meet the following criteria: knots – each piece may contain up to four solid knots; knot diameters will not exceed one‑quarter of the total piece width. There will be no rot, decay, partially fused or fallen knots. Cracks – no ring cracks; fine hairline cracks (1–2 mm (0-0.1 in)) may be present. Pressure‑treated wood may contain acceptable longitudinal and radial cracks within tolerance limits. Resin pockets – at most one per piece, not longer than 10 cm (3.9 in); no dripping or sucking resin. No inner bark, rot cavities, or insect holes. No manufacturing defects; only permissible deviations within the specified tolerances. Deflection – will not exceed 1/50 of the piece length; impact marks will not exceed 1/100 of the piece width. Twist – will not exceed 2 mm (0.1 in) per meter of length. Edge deflection – will be tolerated between 1/50 and 1/100 of the piece length. Sanding – all visible surfaces will be sanded to remove splinters.