Wooden Covered Picnic Table 250(L) x 245(H) x 250(W)
Price on request
SKU: SS-012449
Product Features • Our covered picnic tables are among the most aesthetically refined items in the category, ranking at the top from the moment they are presented. • Dimensions (L×H×W) are 253 cm (99.6 in) × 242 cm (95.3 in) × 248 cm (97.6 in). • The tabletop incorporates ten 4.2 cm (1.7 in) × 9.2 cm (3.6 in) sections of first‑grade imported Siberian pine lumber, shaped in an oval form. • The seating surfaces use six 3.8 cm (1.5 in) × 8 cm (3.1 in) × 185 cm (72.8 in) sections of first‑grade Scots pine lumber, laminated with polyurethane adhesive to create curved profiles. • The leaning surfaces consist of four 5 cm (2 in) × 8 cm (3.1 in) × 185 cm (72.8 in) sections of first‑grade Scots pine lumber, also laminated with polyurethane adhesive to form curves. • The connection posts between roof and base are 8.2 cm (3.2 in) × 8.2 cm (3.2 in); the roof includes four 3.8 cm (1.5 in) × 6 cm (2.4 in) sections and four additional 3.8 cm (1.5 in) × 6 cm (2.4 in) sections; the table legs comprise four (two right, two left) 3.8 cm (1.5 in) × 8 cm (3.1 in) sections of first‑grade Scots pine, laminated with polyurethane adhesive. • The roof is covered with 1.8 cm (0.7 in) × 8.5 cm (3.3 in) first‑grade pine laminated board, topped with a full‑coverage shingle system. • At the junction of roof and leg posts, a decorative roof trim of at least 2.3 cm (0.9 in) × 19.2 cm (7.6 in) is used. • Metal brackets (minimum 1.5 mm (0.1 in) thickness) attach the seating surface to wooden posts, and metal fasteners (minimum 2 mm (0.1 in) gauge) connect wooden posts to the base legs. • Each laminated element is a single piece; no intermediate joints are added. • All curved components produced with the laminating system are finished with weather‑resistant, polyurethane‑based D4 adhesive suitable for outdoor conditions. • The wood is treated with FX 6100 impregnation, a water‑based pure acrylic finish that dries by evaporation of water and solvent. • After impregnation, a two‑component, air‑drying, PU‑type exterior varnish is applied. • Visible screws are black‑oxide coated; other screws are zinc‑plated. • All lumber undergoes a kiln‑drying process, reducing moisture content to approximately 10 %. • The product is guaranteed except for user error. • The table is shipped disassembled with an installation guide; assembly can be completed using a cordless drill without cutting or shaping.