51509 – Wooden Playground (Eco Series)
Price on request
SKU: SS-012263
Technical Specifications Seating Area: 730 × 760 cm (287 x 299 in) Safety Area: 1030 × 1060 cm (406 x 417 in) Tower Height: 311 cm (122 in) Slide Connection Height: 100‑150‑150 cm (59.1 in) Age Group: 3 years and up Spare Parts • Wooden swing A pipe – 1 piece • Wooden swing carrier pipe – 1 piece • Polyethylene swing seat with guard – 1 piece • Wooden swing seat – 1 piece • Wooden staircase guard – 2 pieces • Wooden stair steps – 10 pieces • Wooden tower pipe (H 150 cm (59.1 in)) – 8 pieces • Wooden square platform – 3 pieces • Wooden platform guard – 5 pieces • Wooden roof – 2 pieces • Wooden slide entry – 3 pieces • Polyethylene straight slide (H 150 cm (59.1 in)) – 1 piece • Polyethylene spiral slide (H 150 cm (59.1 in)) – 1 piece • Polyethylene straight slide (H 150 cm (59.1 in)) – 1 piece Carrier Construction 1. The carrier uprights are 260 cm (102 in) long with a cross‑section of 9 × 9 cm (3.5 x 3.5 in). 2. Sharp edges on the wooden beams are rounded to prevent injury. 3. Anchor blocks at the base of the uprights are made from 10 × 10 cm (3.9 x 3.9 in), 2 mm (0.1 in) thick box profile. 4. The foot sections of the 150 cm (59.1 in) tower uprights are wrapped with 5 × 9 cm (2 x 3.5 in) wooden pieces, 110 cm (43.3 in) long, to create a sandpit area. 5. All connections use stainless‑steel wood screws that are recessed into the beams and covered with polyurethane caps. 6. The wood used is pressure‑treated spruce/pine. Wooden Square Platform 1. Platform dimensions: 110 × 110 cm (43.3 x 43.3 in). 2. The platform is built by wrapping the carrier uprights (5 × 9 cm (2 x 3.5 in), 110 cm (43.3 in) long) around the perimeter, then placing two 4 × 9 cm (1.6 x 3.5 in), 81.5 cm (32.1 in) wooden pieces between each pair of uprights. The remaining gaps are filled with nine pieces of 4 × 9 cm (1.6 x 3.5 in) wood, each 100 cm (39.4 in) long, side by side. 3. The wood is pressure‑treated spruce/pine. Wooden Roof 1. Roof dimensions: 115 × 115 cm (45.3 x 45.3 in), height 41 cm (16.1 in). 2. There is a 152.5 cm (60 in) clearance between the lower edge of the roof eaves and the platform. 3. The square roof is formed by overlapping wooden lambris. 4. The wood is pressure‑treated spruce/pine. Double Slide 1. Designed to descend from a 100 cm (39.4 in) high platform with a maximum slope of 40° (no point exceeds 60°). 2. Total slide width: 100 cm (39.4 in); running width: 40 cm (15.7 in); length: 210 cm (82.7 in). 3. Side walls are 15 cm (5.9 in) high. 4. The intermediate section height is 7 cm (2.8 in). 5. At the slide entrance, a wooden safety barrier guides children onto the slide; at the exit, a 35 cm (13.8 in) long flat piece slows the child’s speed. 6. Slides are fastened to the platform with galvanized bolts covered by injection‑molded plastic washers to preserve appearance and extend durability. 7. The slide is anchored to the ground with a 23 cm (9.1 in) long, 88 mm (3.5 in) diameter, 2 mm (0.1 in) wall‑thick pipe welded to a 10 × 22 cm (3.9 x 8.7 in), 4 mm (0.2 in) thick metal plate. Straight Slide 1. Designed to descend from a 150 cm (59.1 in) high platform with a maximum slope of 40° (no point exceeds 60°). 2. Total slide width: 65 cm (25.6 in); running width: 50 cm (19.7 in); length: 330 cm (130 in). 3. Side walls are 16 cm (6.3 in) high. 4. A 35 cm (13.8 in) long flat piece at the exit moderates the child’s speed. 5. Installation uses galvanized bolts with plastic washers as described above. 6. Ground connection follows the same pipe‑to‑metal‑plate method as the double slide. Spiral Slide 1. The slide attached to the 150 cm (59.1 in) high platform is fabricated as a single piece so that the incline of the running section never exceeds an average of 40° and never reaches 60° when measured relative to the slide’s longitudinal axis. 2. A 40 cm (15.7 in) long flat piece at the exit reduces the child’s speed. 3. Slide dimensions: total width 110 cm (43.3 in), length 190 cm (74.8 in), running width 45 cm (17.7 in). 4. Side walls are 20 cm (7.9 in) high. 5. Installation and ground anchoring use the same galvanized bolts, plastic washers, and pipe‑to‑metal‑plate system. Wave Slide 1. Designed to descend from a 150 cm (59.1 in) high platform with a maximum slope of 40° (no point exceeds 60°). 2. Total slide width: 65 cm (25.6 in); running width: 40 cm (15.7 in); length: 320 cm (126 in). 3. Side walls are 16 cm (6.3 in) high. 4. A 35 cm (13.8 in) long flat piece at the exit moderates speed. 5. Fastening and anchoring follow the same method as the other slides. Swing 1. Swing seating area: 108 × 270 cm (42.5 x 106 in); height: 204 cm (80.3 in). 2. Swing carrier legs are 9 × 9 cm (3.5 x 3.5 in), 208.5 cm (82.1 in) long, made of wooden material.