Next Generation Playground Play Set · SS-012091
Price on request
SKU: SS-012091
Product Features: Installation Area: 916 × 920 cm (361 x 362 in) Safety Area: 920 × 924 cm (362 x 364 in) Age Range: 5–12 years Child Capacity: 16–24 Fall Height: 213.36 cm (84 in) Pole Diameter: 11.43 cm (4.5 in) Spare Parts: - H: 245 cm (96.5 in) single‑row gravel bridge – 1 piece - H: 245 cm (96.5 in) semi‑circular crossing climbing element – 1 piece - H: 245 cm (96.5 in) curved tepegöz rotating element – 1 piece - H: 245 cm (96.5 in) single‑pole tepegöz reverse horizontal climber – 1 piece - H: 60 cm (23.6 in) single gravel stone – 3 pieces Polyethylene Components: Linear low‑density polyethylene (LLDPE) is a thermoplastic used in various products. It is a semi‑permeable, pliable, and highly durable polymer that is inexpensive and highly resistant, making it popular in industry. Polyethylene is classified by density and chemical properties. Its mechanical properties depend on molecular weight, crystal structure, and branching type. Although properties vary by type, common characteristics include good resistance to outdoor conditions and moisture, flexibility, low mechanical strength, and excellent chemical resistance. Polyethylene is used to manufacture slides, stairs, guardrails, barriers, accessories, roofing, etc. To prevent color fading, masterbatch pigments used for coloring polyethylene must have a lightfastness rating of 6 or higher. The product's wall thickness must be at least 6 mm (0.2 in) where the material is subject to pressure and friction, and at least 4 mm (0.2 in) for components that are not load‑bearing such as barriers and shade structures. Thickness tolerance is ±5%. Electrostatic Powder Coating Process: All metal parts are first grit‑blasted to remove oil, dirt, and rust, creating a porous surface for better paint adhesion. Fine steel beads are then sprayed with compressed air to open pores and clean the metal surface. After manufacturing, metal parts are coated with a polyester‑based electrostatic powder and baked at 200–220 °C for 20 minutes. Subsequently, parts undergo a 10‑minute 70 °C dip in a 5% degreasing bath, followed by a 15‑minute 50 °C dip in a 1% iron bath, then rinse and dry. Finally, the components are coated with durable outdoor‑grade polyester powder paint and cured in a 180–200 °C oven for 20–30 minutes. Weld seams are protected by applying a final uniform coating after welding. Product Overview (ID 53840): The Next Generation Playground Play Set is a comprehensive play area built from durable components that encourage children to burn healthy energy through challenging climbing and balance games. One end of the structure features a floating bridge with a wavy, turtle‑shell‑shaped deck. Children can jump upward from the bridge and grab the steps of an overhead rotating platform for momentum or a push from a friend or adult to around. Adjacent to this is a curved gravel bridge—a long, circular staircase that invites kids to use careful coordination to avoid touching the ground. At the opposite end, a vertical ring tower rises from the center of a circle, allowing children to climb up the middle or scale the outer edges. From there, they can descend via a saddle slide that completes the circuit without needing to run back.