Garden Seating Set 250(L) x 248(W) x 75(H)
Price on request
SKU: SS-011404
Seating Area: 300 × 315 cm (118 x 124 in) Height: 75 cm (29.5 in) Wood Specifications: The raw material will be 1st‑grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be machined with a maximum tolerance of ± 2 mm (0.1 in), and overall dimensions with a tolerance of ± 20 mm (0.8 in). Required wood qualities include: - Knots: Each piece may contain up to four solid knots; knot diameters will not exceed one‑quarter of the part width. No rot, split, partially fused, or fallen knots are allowed. - Cracks: No ring cracks; fine hairline cracks (1‑2 mm (0.1 in)) are permissible, as are pressure‑treated head and body cracks within tolerance limits. - Resin Pockets: At most one pocket per piece, not exceeding 10 cm (3.9 in) in length. No leaking or pulling resin, inner bark, rot cavities, or insect holes are permitted. - Manufacturing Defects: None; only tolerances may cause minor variations. - Bend: Deflection will not exceed 1/50 of the part length. - Impact: Impact marks will not exceed 1/100 of the part width. - Twist: Twist will not exceed 2 mm (0.1 in) per meter of length. - Shear: Shear deformation will be tolerated between 1/50 and 1/100 of the part length. - Sanding: All visible surfaces will be sanded smooth to remove splinters. Wood Carriers: Carrier legs will be crafted from pine lumber sized at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped knives and decorative motifs. Seating Units: Four seating units surround the table. Each seat width is 30 cm (11.8 in); the short seat length is 140 cm (55.1 in), the long backrest seat length is 160 cm (63 in), and seat height is 45 cm (17.7 in). Seat carriers are made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped knives and motifs. Laths are 40 × 90 mm (1.6 x 3.5 in) wood, mounted to the carrier with special galvanized screws. Table: The table measures 160 × 140 cm (63 x 55.1 in) and is constructed from pine lumber at least 40 × 90 mm (1.6 x 3.5 in), featuring oval motifs cut with diamond‑tipped knives. Table legs are 75 cm (29.5 in) high, also made from pine lumber at least 40 × 90 mm (1.6 x 3.5 in) with diamond‑tipped knife motifs.