Wood – Wooden Rectangular Table (Profile Leg) 120(L) x 60(W) x 75(H)
Price on request
SKU: SS-011395
Seating Area: 120 x 60 cm (47.2 x 23.6 in). Height: 75 cm (29.5 in). Wood Characteristics: The wood raw material used for manufacturing will be 1st‑grade Yellow Pine (Pinus sylvestris) lumber. Wood sections will be produced with a maximum tolerance of ±2 mm (0.1 in), and overall wood dimensions with a maximum tolerance of ±20 mm (0.8 in), as required by the project. Each piece may contain up to four solid knots, with the total knot width not exceeding one‑quarter of the part width. No rotten, split, partially cracked, or fallen knots will be present. No ring cracks will be present; hairline cracks of 1–2 mm (0-0.1 in) may occur. Pressure‑treated conditions may allow suitable end and longitudinal cracks, but only within tolerance limits. Each piece may contain at most one resin pocket not exceeding 10 cm (3.9 in) in length, with no leaking or pulling resin. No inner shell, rot cavity, or insect holes will be present. No manufacturing defects, only deviations within the specified tolerances. Bending deflection will not exceed 1/50 of the part length, and impact marks will not exceed 1/100 of the part width. Twist will not exceed 2 mm (0.1 in) per meter of length. Bow bend will be tolerated between 1/50 and 1/100 of the part length. All visible surfaces will be sanded smooth to remove splinters.